|
| ||||
Features:
- Auto On with signal present
- 12V trigger
- Powerful DSP for manufacturer settings of limiters, equalization, high pass filter etc.
- 4 DSP programmable rotary controls for users. Typical functions assigned are; Volume, Low Frequency equalization, Crossover, Delay
- Full bridge outputs for no current pumping
- Power specified at low frequencies where you need it.
- State of the art modulation and feedback networks for low distortion and invariant frequency response with load.
Specifications
Country of manufacture: USA
Protection: Thermal, DC, turn-on bursts, subsonic, incorrect loads, clipping elimination
Indicators: Power (green), Standby (red)
Connectors: 2 x RCA summing, XLR input and looping output. IEC C18/C13 AC mains
Warranty: Three years parts and labor
RACK
SpeakerPower rack mount amplifiers are uniquely designed for long term high power output at extremely low frequencies to meet
the demands of synthesized bass in electronic dance music, crowd rousing
reinforcement in sports stadiums, and explosive special effects for cinema and
elsewhere. High efficiency ensures
cool running and reliability even in adverse environments. State of the art power supply and class D
amplifier technology deliver unsurpassed sonic performance and long-term reliability under extreme stress in touring or fixed installation applications. Designed for
full time 2 ohm operation, the high power output can be used to fully drive
multiple parallel woofers economically in large systems.
• Dual mono construction. Full power all the time.
• Full bridge outputs for no current pumping
• Power specified at low frequencies where you need it.
• State
of the art modulation and feedback networks for low distortion and invariant
frequency response with load.
Specifications
Country of manufacture:
Dimensions: 2RU
89 mm x 483 mm x 368 mm including side and back rack ears
(3.5” x 19” x 14.5”) 10.5 kilo 23 lbs
Cooling: Dual, variable speed fans with rear to
front air flow
Protection::
Thermal, DC, turn-on bursts, subsonic, incorrect loads, clipping elimination
Indicators::
Power, Signal Present, Clip
Connectors: Stereo XLR input and looping output. Dataport.
Remote standby. Two High current Speakon outputs. 30A Powercon AC mains
Warranty:
Three years parts and labor
|
|
SP2-12000 |
SP2-6400 |
SP2-8000 |
SP2-4800 |
|
Rated power 2 x 2 ohms |
6000W per ch both driven |
|
4000W per ch both driven |
|
|
Rated power 2 x 4 ohms |
3800W per ch both driven |
3400W per ch both driven |
2600W per ch both driven |
2400W per ch both driven |
|
Rated power 2 x 8 ohms |
2000W per ch both driven |
2000W per ch both driven |
1300W per ch both driven |
1300W per ch both driven |
|
Maximum voltage no load |
126VAC |
126VAC |
109VAC |
109VAC |
|
AC Mains voltage |
208-240VAC 50/60 Hz |
208-240VAC 50/60 Hz |
120VAC 50/60 Hz |
120VAC 50/60 Hz |
|
Rated power 2 x 2 ohms |
3000W per ch both driven |
|
|
|
|
Rated power 2 x 4 ohms |
2150W per ch both driven |
2000W per ch both driven |
|
|
|
Rated power 2 x 8 ohms |
1200W per ch both driven |
1200W per ch both driven |
|
|
|
Maximum voltage no load |
112VAC |
112VAC |
|
|
|
AC Mains voltage |
120VAC 60 Hz |
120VAC 60 Hz |
|
|
|
Frequency response |
5Hz-20Kz +/- 1.5dB |
5Hz-20Kz +/- 1.5dB |
5Hz-20Kz +/- 1.5dB |
5Hz-20Kz +/- 1.5dB |
|
Input CMRR |
|
|
|
|
|
Voltage gain |
30dB |
30dB |
30dB |
30dB |
|
Crosstalk |
>90dB |
>90dB |
>90dB |
>90dB |
|
Hum and noise |
99dB A wtd ref full 8 ohm pwr |
|
|
|
|
Output impedance |
< 0.01ohm 20Hz-1KHz |
|
|
|
|
Input sensitivity |
2VRMS |
|
|
|
|
Input impedance |
40K ohms |
|
|
|
|
1/8th output power AC draw |
1130 |
690 |
1130 |
690 |
|
Idle power draw |
40W |
40W |
30w |
30w |
|
Weight |
22 lbs |
22lbs |
22 lbs |
20lbs |
|
Input sensitivity |
2VRMS |
|
|
|
|
Input impedance |
40K ohms |
|
|
|
|
1/8th output power AC draw |
1130 |
690 |
1130 |
690 |
|
Idle power draw |
40W |
40W |
30w |
30w |
|
Weight |
22 lbs |
22lbs |
22 lbs |
20lbs |
